packet size problem

[David Vrabel]

CC'd linux-usb-devel since this is more of a USB problem than a UWB one.

Dear Inaky and Reinette,
I had download and used the Linux UWB driver luwb-1.8.9. I got a
problem and want to consult you.
I am sorry that I don't exactly know the way to report this. So I send
email directly. If it's not suitable, I apologize for it.
Linux Distribution:CentOS5
PC-CPU: Intel P3
Kernel: 2.6.21
Driver: luwb-1.8.9
Host:USB-IF HWA based PDK
Device:Wireless USB MassStorage Device.(LucidPort)
(1)Storage driver sent a CBW(Command Blo Wrapper) to read 63
sectors.(63*512 = 32256 bytes)
(2)USB Core(?) split this request into 9 inbound URBs.(1*2560+7*4096+1*1024)

Yes, USB core assumes that when creating URBs from a sg list that each
element in the list is a valid portion of the transfer (i.e, all but the
last are a multiple of wMaxPacketSize).

Either a) USB core should consider wMaxPacketSize when creating URBs in
usb_sg_init(); or b) the USB mass storage device should ensure it only
submits sg lists that can be split into valid URBs.

Both of these will require that data in an invalid sg list is copied
into a virtually contiguous buffer (which can then be submitted in a
single URB).

(The real solution is for the host controllers to support scatter-gather
DMA.)

(3)Since Device's max packet size is 1024 bytes. But the first URB ask
for 2560
bytes which are not a multiple of 1024 bytes.
(4)So when HWA asks for the last 512 bytes of first URB, device still
returns
1024 bytes. Then HWA will reply transfer request fail to driver.
(5)The same problem exists when device's max packet size is larger than 512
bytes.
I also attached related partial kernel log message.
Thank you.
Best Regards,
Antonio <http://www.alcormicro.com>